Without any doubt, all of us can write the programs through the utilization of computer networking with the assistance of our research professionals and what they have listed out in this article.
Phase: I
Initially, we have to write the program in Ns3based on computer network. For that, we have to create the main file with .cc file extension in scratch folder.
After completing the main file creation, we have to program the code as the sample codes mentioned in the following.
int64_t streamIndex = 0; ObjectFactory pos;
pos.SetTypeId ("ns3::RandomRectanglePositionAllocator");
pos.Set ("X", StringValue ("ns3::UniformRandomVariable[Min=1.0|Max=1000.0]"));
pos.Set ("Y", StringValue ("ns3::UniformRandomVariable[Min=1.0|Max=1000.0]"));
Ptr taPositionAlloc = pos.Create ()->GetObject ();
streamIndex += taPositionAlloc->AssignStreams (streamIndex);
MobilityHelper mobility;
mobility.SetPositionAllocator(taPositionAlloc);
std::stringstream ssSpeed; ssSpeed << "ns3::UniformRandomVariable[Min=0.0|Max=" << nodeSpeed << "]";
std::stringstream ssPause; ssPause << "ns3::ConstantRandomVariable[Constant=" << nodePause << "]";
mobility.SetMobilityModel ("ns3::RandomWaypointMobilityModel","Speed", StringValue (ssSpeed.str ()),"Pause", StringValue (ssPause.str ()),
"PositionAllocator", PointerValue (taPositionAlloc)); mobility.Install (IoTNodes);
#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/mobility-module.h"
#include "ns3/config-store-module.h"
#include "ns3/wifi-module.h"
#include "ns3/VoIPprocess.h"
#include "ns3/internet-module.h"
#include "ns3/ipv4-static-routing-helper.h"
#include "ns3/ipv4-list-routing-helper.h"
#include "ns3/yans-wifi-phy.h"
#include "ns3/netanim-module.h"
#include < vector >
#include "ns3/flow-monitor-module.h"
#include < cassert >
#include "ns3/ipv6-static-routing-helper.h"
#include "ns3/ipv6-routing-table-entry.h"
#include "ns3/mpls-module.h"
#include "ns3/openflow-module.h"
Phase: II
For instance, we have implemented the program for your reference through the execution of the below mentioned commands.
cd /home/research/ns-allinone-3.26/ns-3.26
sudo ./waf –run Main –vis
Finally, we have shared the result that is acquired through the implementation of the program in the following.
You guys can reach us at time to clarify your doubts based the process of writing and implementing of research programs.
| Technology | Ph.D | MS | M.Tech |
|---|---|---|---|
| NS2 | 75 | 117 | 95 |
| NS3 | 98 | 119 | 206 |
| OMNET++ | 103 | 95 | 87 |
| OPNET | 36 | 64 | 89 |
| QULANET | 30 | 76 | 60 |
| MININET | 71 | 62 | 74 |
| MATLAB | 96 | 185 | 180 |
| LTESIM | 38 | 32 | 16 |
| COOJA SIMULATOR | 35 | 67 | 28 |
| CONTIKI OS | 42 | 36 | 29 |
| GNS3 | 35 | 89 | 14 |
| NETSIM | 35 | 11 | 21 |
| EVE-NG | 4 | 8 | 9 |
| TRANS | 9 | 5 | 4 |
| PEERSIM | 8 | 8 | 12 |
| GLOMOSIM | 6 | 10 | 6 |
| RTOOL | 13 | 15 | 8 |
| KATHARA SHADOW | 9 | 8 | 9 |
| VNX and VNUML | 8 | 7 | 8 |
| WISTAR | 9 | 9 | 8 |
| CNET | 6 | 8 | 4 |
| ESCAPE | 8 | 7 | 9 |
| NETMIRAGE | 7 | 11 | 7 |
| BOSON NETSIM | 6 | 8 | 9 |
| VIRL | 9 | 9 | 8 |
| CISCO PACKET TRACER | 7 | 7 | 10 |
| SWAN | 9 | 19 | 5 |
| JAVASIM | 40 | 68 | 69 |
| SSFNET | 7 | 9 | 8 |
| TOSSIM | 5 | 7 | 4 |
| PSIM | 7 | 8 | 6 |
| PETRI NET | 4 | 6 | 4 |
| ONESIM | 5 | 10 | 5 |
| OPTISYSTEM | 32 | 64 | 24 |
| DIVERT | 4 | 9 | 8 |
| TINY OS | 19 | 27 | 17 |
| TRANS | 7 | 8 | 6 |
| OPENPANA | 8 | 9 | 9 |
| SECURE CRT | 7 | 8 | 7 |
| EXTENDSIM | 6 | 7 | 5 |
| CONSELF | 7 | 19 | 6 |
| ARENA | 5 | 12 | 9 |
| VENSIM | 8 | 10 | 7 |
| MARIONNET | 5 | 7 | 9 |
| NETKIT | 6 | 8 | 7 |
| GEOIP | 9 | 17 | 8 |
| REAL | 7 | 5 | 5 |
| NEST | 5 | 10 | 9 |
| PTOLEMY | 7 | 8 | 4 |
